Dryer Not Heating in Boston \u2014 Here's Why, and How We Fix It

A dryer that tumbles but never gets hot is one of the most common calls we get in Boston, and it’s rarely the whole machine failing at once. Usually it’s one specific part, or a blocked vent working against it. Here’s what we check first, and when it’s time to call a technician.

Why Your Dryer Runs But Won't Heat

Electric dryers run on two household circuits: one powers the tumbling motor, the other feeds the heating element. It’s common for one side of that 240-volt supply to fail \u2014 a breaker trips or a connection corrodes \u2014 while the motor keeps running fine. That’s why a dryer can tumble normally with zero heat.
Gas dryers heat differently, using an igniter and gas valve coils to light the burner. If the igniter glows but the burner never lights, the valve coils are usually the culprit. If the igniter never glows at all, it’s typically the igniter itself or the flame sensor.
  • A burned-out heating element (the most common cause)
  • A blown thermal fuse, often tripped by a blocked vent
  • A failed high-limit thermostat
  • A tripped breaker feeding only one leg of the circuit

The Most Overlooked Cause: A Blocked Vent

In older Boston triple-deckers and multi-unit buildings, dryer vents often run long distances through interior walls and multiple floors before reaching the outside. A clogged or iced-over vent forces the dryer’s safety thermostat to cut power to the heating element to prevent overheating, so the drum keeps turning while the heat shuts off. New England winters make this worse \u2014 exterior vent flaps can freeze shut after a storm.

Is It Safe to Keep Running the Dryer?

If you smell anything burning, stop using the dryer immediately and call us. A dryer that overheats or runs with a severely blocked vent is one of the leading causes of home dryer fires, so this isn’t something to put off.

Frequently Asked Questions

This is a classic sign of a blocked vent tripping the safety thermostat, rather than a failed heating element. We check airflow first in these cases.

It’s usually one of the more affordable dryer repairs, and most heating elements are replaced in a single visit.

Clicking with no ignition usually points to the igniter or the gas valve coils not opening. We test both on arrival.

Yes. It’s one of the most common causes of home dryer fires, which is why we always check vent airflow as part of a no-heat diagnosis.

Get Real Heat Back Today

Call (XXX) XXX-XXXX or book online for same-day dryer repair anywhere in Boston.